 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Our Products - QPR 2000
|
A permanent patch in a matter of minutes... QPR 2000 (Quality Pavement Repair) is a premixed, open graded cold patch made with 100 percent crushed, washed aggregate and a special blend of asphalt cements, anti-stripping additives and adhesive agents. QPR 2000 is much more effective than traditional cut-back, cold mixes because of its tenacious binding adhesive. Even when applied to wet or frozen potholes, QPR 2000 will compact with the back of a shovel and may then be opened to traffic immediately. The combination of materials in QPR 2000 resists rutting while providing excellent bearing strength. Where other cold mix materials may ravel and lift out because the base asphalt material will not adhere to the aggregate, or because the cut-back agents enlarge the original hole, QPR 2000 will continue to perform. |
||
| QPR 2000 can be used in wet and dry conditions and in temperatures from minus 15 degrees through 100 degrees F. QPR 2000 will adhere to steel, concrete and asphalt surfaces. It is ideal for utility cuts, railway crossings and, of course, potholes and broken edges on parking areas, streets and highways. QPR 2000 breathes under severe freeze/thaw conditions and will heal itself. Stockpile QPR 2000 outdoors, uncovered, for up to two years. |
 Asphalt cement strips from the aggregate when traditional cold mix (left) is immersed in water - QPR 2000 (right) remains coated. |
|
Always ready-to-use. No heating or mixing. |
Adheres to steel, concrete, and asphalt, even in wet and snowy weather. |
 Open to traffic immediately - no raveling. |
Web Design by J Maze Design